Search Results

The Graphic LCD Controller is a graphical user interface to control your 3D printer without the need for a direct computer connection. This controller has an integrated SD card reader, a rotary encoder with push button and a 128x64 graphic LCD display, allowing all types of actions from calibration to axis movements and direct...

A plated copper Volcano heater block allows you to reach higher temperatures than 500°C (providing you use a PT100 or PT1000) unlocking the possibilities of printing high-temperature filaments such as Ultem and PEEK. The plated copper Volcano heater block features a longer melt path providing higher flow rates for faster, larger and stronger...

This kit includes a Hemera heatsink with a revised design that's compatible with a Revo HeaterCore and Revo Nozzles. Features Updated Hemera heatsink adds compatibility for Revo Nozzles and Revo HeaterCore Easy upgrade! Just swap over your old Hemera heatsink and attach the Revo HeaterCore Comes in your choice of a single Revo Nozzle...

These small stripboards (otherwise known as protoboards, veroboard, prototype board - etc) are great for quick prototyping and fabrication. They are a more permanent solution than breadboards, and they are ready to solder to. Specifications Size: 50mm x 70mm Hole Pitch: 2.54mm (.1" standard)

These boards are designed to be used in multirotor aircraft - to distribute power from a LiPo battery. These boards are rated to handle up to 80A total current - pretty hefty stuff! We think these boards would be useful in a variety of projects - they're easy to mount in place, and have large,...

Nylon nuts — they're lightweight, don't rust, and are electrically insulating. They're strong too! This is a pack of 25 nylon M3 nuts. Great for hobbyist and RC use. Specifications Material: Nylon Thread size: M3 Pack quantity: 25

Nylon screws - they're lightweight, don't rust, and are electrically insulating. They're strong too! Great for hobbyist and RC use. Specifications Material: Nylon Thread: M3 Quantity: 25

These strip joining plates are perfect for when you really need to give a project some extra strength! If you want to join two pieces of extrusion together, these are the ticket! Made from 4mm thick aluminium, these are pretty tough. They're a little more multi-purpose than our situation-specific mounting plates like...

Lost the spring for your Revo HeaterCore? Don't worry, we sell spares. This pack contains three of them. The spring keeps the HeaterCore in good thermal contact with your Revo Nozzle and secures the HeaterCore to the heatsink. Specifications Pack size: 3 springs Compatible with: Revo Micro, Revo Six, Revo Voron,...

Revo HTA (High Temperature Abrasive) nozzles are built for printing abrasive engineering filaments at temperatures up to 500°C. Compatible with all Revo HotEnds and coldsides, they bring hardened, coated wear resistance to high-temperature materials that standard nozzles can't handle. Built for heat and abrasion Much like ObXidian, HTA nozzles have...

A replacement Revo adaptor for Creality Sprite and Sprite Pro extruders. It pairs with the Revo Creality Sprite Coldside to mount a RapidChange Revo HotEnd on your Sprite extruder. Specifications Compatible with: Creality Sprite and Sprite Pro extruders Suits: RapidChange Revo Creality Sprite Coldside

Revo ObXidian 500 nozzles are powered by E3D's ObXidian 500 technology, making them at least 5 times more wear resistant than the popular ObXidian range and rated for printing at up to 500°C. Compatible with all Revo HotEnds and coldsides, this long-lasting upgrade lets you achieve pristine prints with virtually any...

Push your printer's print speed to its limits with the Revo High Flow Hotside Pack. The High Flow brass Revo Nozzles boost flow rates by around 70% over standard Revo nozzles while keeping the same form factor, and the 60W HeaterCore delivers the extra heating power to match. The flow...

Allow your HotEnd to print at higher temperatures with better accuracy using a PT1000 sensor. PT1000s are RTD temperature sensors like PT100s, but they do not require an additional amplifier board — the sensor connects to your board's existing temperature sensing pin using a 4.7k pullup resistance. Specifications Type: PT1000 RTD (Resistance...

A universal extension cable kit for the E3D Revo HeaterCore. It extends both the heater and temperature sensor wiring, so the HeaterCore can reach your printer's electronics. Specifications Heater cable: Molex Micro-Fit 3.0 2-pin horizontal connector (female) to 2 x ferrules Temperature sensor cable: Molex Micro-Fit 3.0 2-pin horizontal connector (female) to Molex...

The Revo Starter Hotside Pack is the best-value entry point into E3D's RapidChange Revo ecosystem. It pairs a 40W Revo HeaterCore with 0.4mm and 0.6mm brass Revo Nozzles, giving you tool-free nozzle changes in under 60 seconds with no hot tightening. If you're just getting started with 3D printing, or mostly...