Search Results

A full collection of E3D-V6 Ecosystem nozzles, set in a soft foam cushion for protection. Print all the things in all the resolutions! We've included the full range of nozzles for those who want to explore the limits of high-resolution printing with small nozzles, as well high-speed high layer height printing with...

The V6 is E3D's flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you'd like to experiment with more advanced materials or print at different resolutions and sizes, the V6 ecosystem is...

These are the same 30mm fans that are included with the E3D V6 and Lite6. If you're looking for a replacement, this is the fan that you're after. Specifications Dimensions: 30 x 30 x 10mm Lead Length: 1000mm

Push your printer's print speed to its limits with the Revo High Flow Hotside Pack. The High Flow brass Revo Nozzles boost flow rates by around 70% over standard Revo nozzles while keeping the same form factor, and the 60W HeaterCore delivers the extra heating power to match. The flow...

Revo HTA (High Temperature Abrasive) nozzles are built for printing abrasive engineering filaments at temperatures up to 500°C. Compatible with all Revo HotEnds and coldsides, they bring hardened, coated wear resistance to high-temperature materials that standard nozzles can't handle. Built for heat and abrasion Much like ObXidian, HTA nozzles have...

Upgrade your Creality printer to RapidChange Revo and begin changing nozzles within minutes — no tools required. We stock two Revo Creality Coldside kits: a Standard kit for Ender 3 / CR-10 style printers, and a Sprite adaptor kit for the Sprite extruder on the Ender 3 S1. Each kit includes everything you need to...

Keep your RapidChange Revo HotEnd clean with these silicone sock packs. Each pack contains three socks — choose nozzle tip socks for your Revo Nozzles, or HeaterCore socks for the Revo HeaterCore. Socks shield the hot side from molten plastic build-up, stop ooze from sticking, and help keep temperatures stable....

A universal extension cable kit for the E3D Revo HeaterCore. It extends both the heater and temperature sensor wiring, so the HeaterCore can reach your printer's electronics. Specifications Heater cable: Molex Micro-Fit 3.0 2-pin horizontal connector (female) to 2 x ferrules Temperature sensor cable: Molex Micro-Fit 3.0 2-pin horizontal connector (female) to Molex...

A replacement Revo adaptor for Creality Sprite and Sprite Pro extruders. It pairs with the Revo Creality Sprite Coldside to mount a RapidChange Revo HotEnd on your Sprite extruder. Specifications Compatible with: Creality Sprite and Sprite Pro extruders Suits: RapidChange Revo Creality Sprite Coldside

Allow your HotEnd to print at higher temperatures with better accuracy using a PT1000 sensor. PT1000s are RTD temperature sensors like PT100s, but they do not require an additional amplifier board — the sensor connects to your board's existing temperature sensing pin using a 4.7k pullup resistance. Specifications Type: PT1000 RTD (Resistance...

The full metal parts of a genuine E3D V6 HotEnd (1.75mm, direct drive), without any electronics. There is no heater cartridge, thermistor or fan included — ideal for repairs, or for builds that reuse electronics you already have. If you need the complete HotEnd with electronics included, see the full E3D...

Lost the spring for your Revo HeaterCore? Don't worry, we sell spares. This pack contains three of them. The spring keeps the HeaterCore in good thermal contact with your Revo Nozzle and secures the HeaterCore to the heatsink. Specifications Pack size: 3 springs Compatible with: Revo Micro, Revo Six, Revo Voron,...

This kit includes a Hemera heatsink with a revised design that's compatible with a Revo HeaterCore and Revo Nozzles. Features Updated Hemera heatsink adds compatibility for Revo Nozzles and Revo HeaterCore Easy upgrade! Just swap over your old Hemera heatsink and attach the Revo HeaterCore Comes in your choice of a single Revo Nozzle...

Cartridge type thermistors use a Semitec 104NT thermistor, potted in a cylindrical stainless steel cartridge with a high conductivity ceramic based adhesive. The legs are insulated with fibreglass sleeving and terminated with a Molex Microfit 3.0 connector. This makes it easy to disconnect your entire HotEnd without the need for rewiring, especially when paired...

Upgrade your existing V6 setup to RapidChange Revo and unlock rapid, tool-free nozzle changing. This Coldside kit includes a drop-in replacement Revo heatsink plus everything you need to securely mount the new setup to your printer. Key Features Drop-in replacement for your existing V6 setup Tool-free nozzle changes in under 60...

Revo ObXidian 500 nozzles are powered by E3D's ObXidian 500 technology, making them at least 5 times more wear resistant than the popular ObXidian range and rated for printing at up to 500°C. Compatible with all Revo HotEnds and coldsides, this long-lasting upgrade lets you achieve pristine prints with virtually any...