Search Results

This pack is the pinnacle of nozzle prowess, featuring six of E3D's most exciting, useful and experimental nozzles. Brass, Plated Copper Alloy, and Hardened Steel all feature in this kit, matched with the sizes we recommend for the most interesting use cases. Not to mention, this pack means you get...

Durable, non-stick, high-temperature nozzles. Made from nickel-plated copper with a softening point well above 500°C, these nozzles are perfect for high-temperature printing while working just as well with everyday filaments like PLA, ABS and spoolWorks EDGE. Compatible with V6, Lite6, and Titan Aero HotEnds, and Prusa 3D printers. Copper has more...

PT100s are high temperature, high-accuracy temperature sensors that you can now use on your E3D-v6 HotEnd instead of a thermistor or thermocouple. PT100s are able to measure higher temperatures than thermistors - up to 400°C and are more accurate than both thermistors and thermocouples in general. The PT100 sensors are also very...

These are the same thermistors originally used in E3D's V6 and Lite6 HotEnds — handy if you need a replacement! Note that these have now been replaced on newer HotEnds by thermistor cartridges. Semitec's 104GT2 thermistors feature a higher accuracy than regular thermistors — recommended for temperature-critical printing. In Marlin firmware, these...

A kit containing the parts you need to replace a broken thermistor. Suitable for use with the legacy-style E3D HotEnds. For newer HotEnds using thermistor cartridges, check here. Contents 1 x Semitec 100K thermistor 1 x Fibreglass sleeving (100mm) 4 x Ferrules for joining wires 1 x Heatshrink for insulation Note: heater block, heatbreak and nozzle are not included and...

A replacement aluminium V6 heater block, suitable for E3D cartridge-style temperature sensors. The V6 heater block is a core part of the E3D ecosystem as the standard heater block used in most E3D HotEnds. Supplied with an M3 grub screw to secure a cartridge-style Thermistor, PT100 or Thermocouple, and an M3 dome head...

Looking for higher temperature performance? Upgrade your HotEnd with a plated copper V6 heater block, suitable for E3D cartridge-style temperature sensors. A plated copper V6 heater block allows you to reach temperatures exceeding 320°C (providing you use a PT100, PT1000 or thermocouple) unlocking the possibilities of printing high-temperature filaments such as Ultem and...

This Volcano heater block allows you to use E3D's thermistor cartridges, as well as high temperature, high accuracy PT100 temperature sensors. These are the newer version of the Volcano heater block, and are equivalent to what comes in an eruption or power pack kit. With this heater block, you can...

This is an old-style thermistor clamping heater block for a V6 HotEnd. To upgrade to the newer sensor cartridge-style heater block, check out the V6 block & sock kit. Contents V6 HeaterBlock (old thermistor-clamping style) M3x0.5x4 socket dome screw and washer to clamp thermistor M3x0.5x10 socket dome screw to clamp heater...

A plated copper Volcano heater block allows you to reach higher temperatures than 500°C (providing you use a PT100 or PT1000) unlocking the possibilities of printing high-temperature filaments such as Ultem and PEEK. The plated copper Volcano heater block features a longer melt path providing higher flow rates for faster, larger and stronger...

Titanium V6 HeatBreaks are the perfect upgrade for printing at higher temperatures, helping to maintain a sharply defined melt zone at higher temperatures. Genuine E3D HeatBreaks feature a refined internal surface finish to reduce extrusion force and improve retraction reliability. Made from grade 5 titanium, these HeatBreaks are exceptionally strong and have lower...

A replacement HeatSink for V6 HotEnds. Please note: The 1.75mm option fits both Bowden and Direct Drive HotEnds and includes an embedded coupling. For 2.85mm, it is necessary to pick between direct or Bowden configurations. Specifications Compatible with: E3D V6 HotEnd Available filament sizes: 1.75mm and 2.85mm

A fan duct suitable for use with E3D V6 or Lite6 HotEnds. Injection moulded out of translucent polycarbonate. These are much harder wearing than printed parts and significantly less prone to vibration. These fan ducts are included as standard with all V6 (blue) and Lite6 (red) HotEnd kits.

A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose-made high-power ceramic heater cartridge. Get your HotEnd hot quickly and hit the highest of temperatures. These heater cartridges are sourced directly from E3D-Online in the UK, and are a drop-in replacement for the...

Silicone socks to protect and insulate the Volcano heater block and nozzle. A pack of 3x high-temperature non-stick silicone socks for the E3D Volcano and other HotEnds also using a Volcano-style heater block with thermistor cartridges. They will not properly fit the older screw-washer clamped thermistor-style Volcano heater block. These socks will...

The couplings are designed to take PTFE tubing with an outer diameter of 3.18mm for 1.75mm filament, and 6.35mm for 2.85mm filament. These fittings are used in both types of the 1.75mm V6 HotEnds, the 2.85mm Bowden V6 HotEnd, and the Cyclops/Chimera/Kraken/Hemera HotEnds. Specifications PTFE outer diameter (1.75mm filament): 3.18mm...