Search Results

Like a regular tee nut, but double! With 20mm spacing between the two M5 holes, these can be used anywhere you need two tee nuts in close proximity. They can also be used to join two lengths of extrusion, without interfering with the ability to run a wheel along the rail.

These stepper drivers are built around Trinamic's TMC2100 stepper driver IC. TMC2100 drivers have a number of advantages, most notable of which is their quiet operation due to Trinamic's stealthChop technology. These drivers are made in the Pololu-style 'stepstick' footprint. They are compatible with any control board that accepts this footprint,...

These push to fit adaptors (also known as one-touch pneumatic couplers) are the easiest way to attach PTFE (or Teflon) tubing to your extruder or hotend. The PTFE tubing simply pushes into the blue fitting - and it holds tight no matter what. The tubing cannot be removed by either pulling...

Looking for a direct drive upgrade for your 3D printer? Titan Aero is a compact direct drive HotEnd and extruder combination. It takes the lightweight performance, reliability and usability of the V6 and Titan creating a more compact and refined unit. Compact & Rigid By combining the V6 and Titan into a single unit,...

These are stainless steel M3 hex nuts - suitable for use in small hobbyist electronics, including 3D printer builds. M3 is a common size for mounting electronics. Many control boards, displays, endstops, and heated beds work with this size of hardware. Specifications M3 Thread Stainless Steel, A2 304 DIN 934 Standard 25...

These fans run on brushless bearings, meaning they run quietly and have a long lifespan. They are lightweight and can be mounted to a moving carriage without impacting its performance. They are ideal for cooling 3D printer hotends, and are also great for cooling the print itself (if you want to print...

Nylon screws - they're lightweight, don't rust, and are electrically insulating. They're strong too! Great for hobbyist and RC use. Specifications Material: Nylon Thread: M3 Quantity: 25

Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we've produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed and performance from your motion system. Adaptable to Bowden or direct drive setups. Revo Micro is fully compatible with...

These 3D Printer Z-Probes use modulated infra-red LEDs to accurately detect proximity to the print surface, allowing for automatic bed-levelling while printing. Compared to mechanical probe solutions - such as a servo and microswitch - these boards have the advantage of requiring no moving components, weighing less, and having a higher degree of repeatability...

Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V and 24V. Suitable for 1.75mm bowden setups...

Knock together a linear axis in no time with these handy motor mount plates! These suit both NEMA 14 and NEMA 17 stepper motors, and easily mount to our V-Slot extrusion. These pair perfectly with our idler pulley plates - add one of those, some belt, and a carriage, and you've got yourself...

These are handy universal plates - they can be used to make a gantry for any standard V-Slot size, from 20x20 to 20x80. Three slots along the edges that face 'along' the extrusion make it easy to fix timing belt ends in place. There are also two 5mm wide slots which can...

TinyFan is a handy little board that attaches to RAMPS, and allows you to control an extra two fans. TinyFan is ideal for dual-extruder systems, when you've used up all RAMPS's MOSFETs on your HotEnds but still need to get a few fans up and running. We designed TinyFan to be as...

Got a servo motor? Need a longer cable? Fear not, we have the solution! These cables are clearly marked in red, black and white for the different wires. They are male to female and will extend a standard 3-pin servo cable. Specifications Length: 150/300/500mm Gauge: 26AWG Pin Spacing: 2.54mm (0.1")

These strip joining plates are perfect for when you really need to give a project some extra strength! If you want to join two pieces of extrusion together, these are the ticket! Made from 4mm thick aluminium, these are pretty tough. They're a little more multi-purpose than our situation-specific mounting plates like...

These high-quality aluminium GT2 pulleys fit a 5mm shaft, making them ideal for use with NEMA-17 stepper motors or M5 mounting hardware. They will work with any standard GT2 belt up to 7mm in width, and feature a 36-tooth profile. These pulleys include 2 M3 grub screws for a strong grip, and come with...