Search Results

Beguiled by a fancy new chip that is only available in a QFP or QFN pinout? This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 32-QFP pin out with traces going to two rows of 0.1" spaced holes, the other...

Beguiled by a fancy new chip that is only available in a SOIC or (T)SSOP pinout? This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 16-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other...

Itsy Bitsy Teenie Weenie Mini NeoPixel RGB LED-inis! Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels! These MINI (3.5mm x 3.5mm) RGB LEDs are fairly easy to solder and are half the size of the standard 5x5mm NeoPixels you...

The VCNL4010 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of cm) you can use a SHARP IR distance sensor, but those are only good if the object is over 10cm away. The VCNL4010 is designed for much shorter distances...

Round and round and round they go! 12 ultra bright smart LED NeoPixels are arranged in a circle with 1.5" (37mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can...

The Smart Controller is a graphical user interface to control your 3D printer without the need for a direct computer connection. The Smart Controller has an integrated SD card reader, a rotary encoder with push button and a 20x4 line LCD display, allowing all types of actions from calibration to axis movements and direct...

What's a wearable project without LEDs? Our favourite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, these updated Flora NeoPixels have ultra-cool technology: these ultra-bright LEDs have a constant-current driver cooked right into the LED package! The pixels are chainable - so you only need 1 pin/wire to...

Upgrade a project that uses a photocell with the GA1A12S202 analog light sensor. Like a CdS photo-cell, the sensor does not require a microcontroller, the analog voltage output increases with the amount of light shining on the sensor face. This sensor has a lot of improvements that make it better for nearly any project. The...

Want to use any fan, thermistor, or heater cartridge with our tidy modular cables? Grab one of these pigtails and splice it onto whatever you want! These match our E3D-style fan and thermistor cables. Specifications Length: ~10cm Connector: Molex Micro-Fit 3.0 2P Wire: 22AWG

MightyFan is TinyFan's bigger brother. It does the same job - it lets you add extra controlled fans to your RAMPS printer controller, but MightyFan has four fan outputs instead of two - plus an extra auxiliary output for an always-on fan. MightyFan has four controlled fan outputs – each with an...

These precision-made full-sized wheels are compatible with our V-Slot aluminium extrusion, and can be used to achieve smooth linear motion. These are our extreme wheels, which are designed for heavy-duty use. They're made of a hard and clear polycarbonate material, which is much more resistant to compression or wear than the...

A Feather board without ambition is a Feather board without FeatherWings! This is the NeoPixel FeatherWing, a 4x8 RGB LED Add-on For All Feather Boards! Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and make your Feather board strut like...

This pack is the pinnacle of nozzle prowess, featuring six of E3D's most exciting, useful and experimental nozzles. Brass, Plated Copper Alloy, and Hardened Steel all feature in this kit, matched with the sizes we recommend for the most interesting use cases. Not to mention, this pack means you get...

Durable, non-stick, high-temperature nozzles. Made from nickel-plated copper with a softening point well above 500°C, these nozzles are perfect for high-temperature printing while working just as well with everyday filaments like PLA, ABS and spoolWorks EDGE. Compatible with V6, Lite6, and Titan Aero HotEnds, and Prusa 3D printers. Copper has more...

Hardened abrasion-resistant nozzles developed to last a lifetime. 3D printing with abrasives such as carbon fibre, glow-in-the-dark PLA or even filled filaments like woodfill all take their toll on a standard nozzle. These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are...

These nozzles are engineered for ultimate high-temperature performance. Made from a special high-temperature copper-alloy with a softening point of well above 500°C, and with much-increased thermal conductivity, these copper nozzles are perfect for high-temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE. In addition to high-temperature performance,...