Search Results

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight...

This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. There are 3 address pins so you can connect up to 8 to...

Medical grade and food-safe stainless steel nozzles. Print slow! These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers. Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3...

These precision-made full-sized wheels are compatible with our V-Slot aluminium extrusion, and can be used to achieve smooth linear motion. These are solid wheels, which means they're resistant to deflection or deformation. They're a touch sturdier than our regular 'V' wheels, with the tradeoff that they're slightly more expensive. We recommend...

These precision-made full-sized wheels are compatible with our V-Slot aluminium extrusion, and can be used to achieve smooth linear motion. For builds involving a lot of weight or force, you might want to check out our extreme polycarbonate wheels - they're a little pricier again, but much, much stronger! Each and every wheel...

Eccentric spacers are the key to getting your carriages and wheels properly pre-loaded. They let you ensure that the wheels fit the extrusion snugly enough that there's no wobble, but not so much that they can't spin smoothly. These spacers should be used with the wheels on one side of...

Finish off your project in style with a few of these fancy black anodised aluminium end caps. These caps help cover up the ends of our extrusion, giving a cleaner, more professional look. They can fit side-by-side, so you can use these on 20x20, 20x40, 20x60 or 20x80mm extrusion with ease. The...

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V. We do have some other handy level shifters in the shop, from the...

These Delrin Mini V-Wheels pair with our Mini V-Wheel plates to create a compact carriage, capable of smooth linear motion along our V-Slot aluminium extrusion. For builds involving a lot of weight or force, you might want to check out our extreme polycarbonate mini wheels - they're a little pricier, but much, much stronger!...

Double up your power adapters with this wonderfully simple 2-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, two identical plugs to use! We like the rugged moulding on these adapters, and they're really handy when you have a project...

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor. When a capacitive load is detected (e.g. a person touches the sensor-pad area) the red LED lights...

Simple but effective - this breakout board has a USB Micro-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project. We use a micro-AB connector with through-hole shielding pads for an excellent strong connection - it won't rip off by accident! Comes...

This solder is excellent for general through-hole work, hobbyist RC and 3D printer related soldering. This is a small 5g roll of solder - perfect for quick jobs. Specifications 63/37 Solder (63% Tin, 37% Lead) 0.8mm Wire Diameter 5g

These are a really compact way to connect two or three lengths of V-Slot extrusion together - perfect for corners! They're machined from a solid block of aluminium, which means they're very, very strong! They're then anodised black for a nice surface finish, and can bring the understated and professional look to any build....

This lovely little display breakout is the best way to add a small, colourful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory...

Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5V→3V regulator provides 150mA for power-hungry cards 3V level shifting means you can use this with ease on either 3V or 5V systems Uses a proper level shifting chip, not resistors: fewer problems,...