*** We are still accepting and shipping orders at this time. We will update this message if we have to close due to COVID-19. Stay safe! ***

E3D Volcano Nozzle - Nozzle X

New E3D Volcano Nozzle - Nozzle X

The Nozzle X is our NEW ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which provides a fantastic balance of cost and wear resistance. The cherry on the top? Our NEW WS2 ‘polyphobic’ nano-coating, no longer will you find hot molten polymers sticking to your nozzle.

Whilst our hardened steel nozzles are ideal for printing abrasive filaments such as ones loaded with Carbon Fibre, the extreme temperatures can cause the steel to temper and soften, ultimately reducing its abrasion resistance. And then there's our plated copper nozzles, able to cope easily with these immense temperatures but lacking the abrasion resistance required to resist Carbon Fibre. This is where the Nozzle X comes in, a nozzle able to withstand crazy temperatures without softening.

By going with a one-piece all-machined construction we were able to use our existing manufacturing processes to create our carefully tuned internal geometry, which provides fantastic flow response and keep the exact same geometry and compatibility as the rest of the E3D ecosystem.

Benefits of our WS2 ‘polyphobic’ nano-coating:

  • Less build-up, particularly of sticky and filled materials to the nozzle cone
  • Improved first layer reliability; the slick coating has a reduced tendency to ‘drag’ material, particularly at sharp corners where tracks can peel up
  • Slicker, smooth top solid layers with a glassy like finish as a result of the smooth laydown of material
  • Easier nozzle cleaning, what little material that does adhere is easily wiped away with a paper towel leaving a very clean nozzle.

Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt speeds. We've also carefully crafted the internal geometry to optimise flow and throughput, as well as ensuring the nozzle tip is appropriately sized for flattening down extra wide printed traces.

E3D nozzles are easily identified by the number of hex flats drilled with dots (see table).

Number of DotsDiameter
00.60mm
10.80mm
21.00mm
31.20mm
40.40mm

Write a review

Note: HTML is not translated!
    Bad           Good

Genuine E3D-Online Product

Sourced direct from E3D-Online in the UK

  • Brand: E3D
  • Product Code: E3D-VOL-NX
  • $44.95
  • Ex Tax: $40.86

Available Options