E3D-V6 Extra Nozzle - 3.00mm x 0.60mm

E3D-V6 Extra Nozzle - 3.00mm x 0.60mm

Looking for a nozzle to suit E3D's V6 hotend? Look no further! Here's what E3D have to say:

Bringing together community feedback and our extensive testing, we have redesigned our nozzles from the ground up. The new internal geometry of v6 Nozzles is optimised to reduce back-pressure, this ensures smooth,easy flow of filament whilst improving the effectiveness of retractions. The bottom flat surface of the nozzle which flattens down the layer is custom to each nozzle size, for small nozzles a small nozzle tip gives you high precision. On the larger nozzles, a nozzle tip assists in the smooth printing of larger layers.

All nozzles in the series are now individually identifiable with markings on the flats of the hex head making them even more convenient to work with. See the table below for more information on what these markings mean:

# Marks Nozzle Size
0 0.25mm
1 0.30mm
2 0.35mm
3 0.40mm
4 0.60mm
5 0.80mm

 

v6 Nozzles are backwards compatible, so can be used to upgrade your v5 HotEnd. If you are using a v6 HeatBreak it is recommended that you use a v6 Nozzle.

Nozzle
Nozzle Diameter 0.60mm
Nozzle Type Standard (Brass)

Write a review

Note: HTML is not translated!
    Bad           Good

Genuine E3D-Online Product

Sourced direct from E3D-Online in the UK

  • Brand: E3D
  • Product Code: E3D-V6-N-300-060
  • Availability: In Stock
  • $16.95
  • Ex Tax: $15.41