E3D Dual Extrusion+

New E3D Dual Extrusion+

Sleeker, more moddable, and easier to use than ever: we've upgraded the Cyclops and Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion or the Cyclops+ for two-filament, one-nozzle extrusion. Available as a water- or air-cooled HotEnd, in 12V and 24V.

Suitable for 1.75mm bowden setups only.

Still dual extrusion in a tiny package; now with new compatibility and features.

These beasts have evolved. Choose from the classic air, or new-water-cooling, and experience the multi-extrusion possibilities of Chimera+ and Cyclops+. Read more on the E3D blog!

Multi-Extrusion

Choose the Chimera+ for two-filament, two-nozzle dual extrusion, great for multi-material supports. Or try the unique two-filament, one-nozzle Cyclops+. With a hot side designed to switch seamlessly between inputs, Cyclops+ never leaves an idle nozzle.

Ecosystem Compatibility

Cyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. Chimera+ works with our full range of E3D nozzles. The water-cooled variants work with our standard water-cooling kit.

Cyclops+ and Chimera+ are both now compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.

Unique Cyclops Hotside

The Cyclops heater block has been completely reworked, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.

The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.

Water Cooling

By switching to an Aqua water-cooled heatsink, both all-metal HotEnds can be used in the hottest of ambient environments.

The Cyclops Aqua and Chimera Aqua share a highly effective water-cooled heatsink that is compatible with our water-cooling kit and nylon tubing. It's so small and lightweight that if you're looking for a water-cooled V6 equivalent then look no further!

What's Included:

Air-Cooled Cold Side:

  • Air-cooled heatsink
  • 2x black plastic collets
  • 2x blue plastic collet clips
  • Cyclops+ fixings kit (suitable for Cyclops+ and Chimera+)
  • 800mm PTFE bowden tubing
  • 12V/24V fan

Water-Cooled Cold Side:

  • Water-cooled heatsink
  • 4x black plastic collets
  • 4x blue plastic collet clips
  • Cyclops+ fixings kit (suitable for Cyclops+ and Chimera+)
  • 800mm PTFE bowden tubing

Chimera Hot Side:

  • Heatsink compound
  • 2x silicone socks
  • 2x 0.4mm V6 brass nozzles
  • 2x V6 heater blocks
  • Fixings kit
  • 2x30W Heater cartridges (12V/24V)
  • 2x Thermistor cartridges

Cyclops Hot Side:

  • 0.4mm Cyclops nozzle
  • Cyclops heater block
  • 2x Kraken heatbreaks
  • Cyclops+ hotside fixings kit
  • Heatsink Compound
  • 30W Heater cartridge (12V/24V)
  • Thermistor cartridge

Write a review

Note: HTML is not translated!
    Bad           Good

Genuine E3D-Online Product

Sourced direct from E3D-Online in the UK

  • Brand: E3D
  • Product Code: E3D-DUAL
  • $199.95
  • Ex Tax: $181.77

Available Options