Protoboard Plus Tiny - Premium DIY Protoboard
Protoboard Plus is designed to make prototyping electronics projects easier. Unlike regular protoboards made from FR2, Protoboard Plus is a full FR4 PCB - making it sturdier, and more forgiving of hot soldering-iron tips! M3 screw holes make Protoboard Plus easy to fix in place.
Each Protoboard Plus incorporates two rails, ideal for supplying power to your project - simply solder on power wires or a connector, and easily access power across the board. Alphebetical column indicators and numerical row indicators make it easy to keep your design organised, and to make it even easier there's a silkscreen grid on the back of the board.
Protoboard Plus is easy to solder to, and designed to last. Unlike FR2 protoboards, all holes are double sided, so you can solder to either side of the board without a problem. All pads are surface plated using ENIG (electroless nickel immersion gold), which gives the boards much better shelf-life (so you can put a project aside and come back to them much later without issue) and also makes soldered connections resistant to corrosion. ENIG is also more environmentally friendly than other surface-plating techniques, so it's a win-win.
Each Protoboard Plus (except the Tiny) has space on the back to write a note on the silkscreen. Use a regular felt-tip pen for an easily-erasable note, or a paint / acrylic based felt-tip for something more permanent. Never lose track of what project a board belongs to!
- Dimensions: 50x30mm
- Plated Through Holes (excluding rails): 144
- Material: FR4
- Thickness: 1.6mm