Heat Shrink Pack - 42 Pieces Red and Black
This pack includes six different sizes of heatshrink in both red and black.
Heatshrink is helpful in any electronics project. These kits are great when putting a 3D printer together - but they'd also do a good job for hobby / RC electronics - or anywhere else you need to do some wiring!
This heatshrink is made of quality polyolefin, and will shrink down to half its supplied diameter. See below for a list of supplied sizes.
(Number x Internal Diameter x Length)
- 4pcs x 1.0 x 30mm (black）
- 3pcs x 1.0 x 30mm (red)
- 4pcs x 1.5 x 60mm (black)
- 3pcs x 1.5 x 60mm (red)
- 4pcs x 2.5 x 60mm (black)
- 3pcs x 2.5 x 60mm (red)
- 4pcs x 3.5 x 60mm (black)
- 3pcs x 3.5 x 60mm (red)
- 4pcs x 5.0 x 60mm (black)
- 3pcs x 5.0 x 60mm (red)
- 4pcs x 6.0 x 100mm (black)
- 3pcs x 6.0 x 100mm (red)
- Minimum Shrinking Temp: 70°C
- Full Shrinking Temp: 110°C
- Operating Temperature: -55°C to 125°C
- Tensile Strength: 10.4MPa
- Dielectric Strength: 15 kV/mm
- Specification Rating: ISO9001
- Flame Retardant