Magnetic Strip - 2mm Pole-Length - 300mm Long
These magnetic strips pair with our magnetic encoder modules. They come with an adhesive backing to make installation easier, and the magnet is bonded onto a steel strip to prevent any stretching or other deformation - so you can be sure you're getting an accurate reading.
The strip needs to be mounted approximately 0.3mm 'above' the chip on the encoder module - see the magnetic encoder page for more details.
- Length: 300mm
- Width: 10mm
- Thickness: 1.3mm
- Pole Length: 1.00mm (2.00mm pole-pair)