E3D-V6 Extra Nozzle - Hardened Steel

E3D-V6 Extra Nozzle - Hardened Steel

Hardened abrasion-resistant nozzles developed to last a lifetime. 3D printing with abrasives such as carbon fiber, glow-in-the-dark PLA or even filled filaments like woodfill all take their toll on a standard nozzle. These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.



If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon-filled filaments cause rapid and significant damage to standard nozzles. We’ve developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the market.

Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. And you’ll be future-proofed for upcoming materials; we think these nozzles should be able to handle just about anything our material manufacturers think of next.

Because of the thermal and chemical treatment applied to the nozzle, they do have a bit of a dark, sometimes uneven looking colouration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The colouration variance is normal and doesn’t affect function. Any residue left on the nozzle will quickly be flushed in the first few millimetres of extrusion, especially if you flush it out with an abrasive-filled material!

All nozzles in the series are now individually identifiable with markings on the flats of the hex head making them even more convenient to work with. See the table on the left for identification.

Number of DotsDiameter
2 Diagonal0.15mm
00.25mm
10.30mm
20.35mm
30.40mm
60.50mm
40.60mm
50.80mm

 

V6 Nozzles are backwards compatible, so can be used to upgrade your V5 HotEnd. If you are using a v6 heatbreak it is recommended that you use a V6 Nozzle.

Nozzle
Nozzle Type Hardened Steel

Write a review

Note: HTML is not translated!
    Bad           Good

Genuine E3D-Online Product

Sourced direct from E3D-Online in the UK

  • Brand: E3D
  • Product Code: E3D-V6-HSN
  • $34.95
  • Ex Tax: $31.77

Available Options