ColorFabb PLA/PHA - Leaf Green

Out Of Stock ColorFabb PLA/PHA - Leaf Green

ColorFabb manufacture premium quality filment out of a mixture of PLA and PHA, resulting in a PLA-like filament with enhanced properties - colorFabb PLA is tougher, has stronger inter-layer adhesion, and sticks to the print surface better than regular PLA.


  • Premium quality filament manufactured from organic biopolymers
  • Brilliant, vibrant colour that result in fantastic looking prints
  • Precise diameter control for consistent flow rates (tolerance of ± 0.05 mm)
  • Tested on a wide range of printers by ColorFabb
  • Consistent quality - every spool of filament is made in the same production facility to the same high standards
  • Manufactured in the Netherlands
  • Smells like waffles while printing

Printing Tips

ColourFabb PLA/PHA prints at 195-220C, depending on your printer and hotend. If you have a heated bed, the ideal temperature is 50-60C - however ColorFabb will adhere to a cold print bed. Using masking or painters tape will aid adhesion on an unheated bed. Kapton tape also does quite a good job.


  • Material: colorFabb PLA/PHA
  • Diameter Tolerance: ± 0.05 mm
  • Density: 1.210-1.430 g·cm-3
  • Glass Transition Temperature: 55C
  • Minimum of 750g filament per spool

Write a review

Note: HTML is not translated!
    Bad           Good

  • Brand: ColorFabb
  • Product Code: CF-PLA-LEAF-GREEN
  • $65.95
  • Ex Tax: $59.95

Available Options